Specification of this Electric Cold Paint Road Marking Machine Manufacturer
1.electric cold paint spray road marking machine can work 4 hours on a single full charge.
2.easy to operate and maintain.
3.It canbe widely used in many place,such as football pitch, school,
community,parking space,factory,Driving schools,gas station etc.
4.no need to use gas or oil,and has little noise,so it is very friendly to the the Environment.
5.the weight of machin...
Specification of this Hand Push Cold Plastic Road Marking Machine Manufacturer
Apply for MMA(98:2) cold plastic spot line
Cold plastic road marking machine for spot line（MMA 98：2）
Honda GX160 gasoline engine 5.5HP
gasoline tank capacity
24V，Battery:5 Ah 20AR
gas displacement 0.21Nm³./min
Working air pressure
Solidify monitoring system
Import from Germany，EGE Electronic flow controller
Specification of this Hydraulic Double Cylinder Thermoplastic Preheater Manufacturer ( Fuel:Diesel or LPG)
it is updated from theLPGthermoplasticpreheater,
which has the advantage of convenience,economical and high efficient.
especially suitable for the area with strong wind.
15PS electric strat water-cooled diesel engine
(LXD1200B: 16PS electric start air-cooled diesel engine)
A hydraulic stirring system with a protective device can stir ...
Specification of this Hand Push High Pressure Airless Cold Paint Road Marking Machines Manufacturer
LXD-9L is the fastest among our cold paint road marking machines,its working speed can reach 13kh/h,
Since it has powerful hydraulic system which make it work well under harsh environment.
Hand-push,high pressure airless spraying
5.5PS (Honda engine)
built-in Reversing hydraulic pump(imported from German)
Specification of this Automatic Truck Mounted Ultrahigh Pressure Water Jetting Paint/Rubber Removal Manufacturer
Standard data parameters list
General key component
(1) Front bracket module（1）
(2) Luxinda customized spray disc（3）
(3) Luxinda special nozzle（2）
(4)Truck required, For example: Jac truck,K5L cab，Engine:Yuchai ,YC4S160-50,Gearbox:fast-gear, 6DS60T,front axle: 3.5T, rear axle: 8T, crossbeam:230*75*6，tire: 10R22.5, vacuum tire。carriage dimension: 6800*2450*600，gross m...
Specification of this Ride On Type Thermoplastic Road Marking Machines Manufacturer
Thermoplastic road marking machine is the key equipment used in thermoplastic road marking construction,
it need to work together with thermoplastic preheater.
The marking shoe is made of high-precision cast iron,
which can make the road line orderliness,uniform thickness and more beautiful.
The grounded knife of marking shoe can adapt to different kinds of road.
Specification of this High Pressure Airless Cold Paint Spray Road Marking Machine Manufacturer
It is special equipment to normal temperature paint construction.
It is suitable for roads, highway, parking lot,airport, station.it can mark a straight line, dotted line, curve, zebra crossing, arrows, etc.
It is the spray equipment with high pressure,equal discharge and airless.
It use gasoline engine to drive single plunger pump to work,
which can generate high pressure ...
Specification of this Hydraulic Double Cylinder Thermoplastic Preheater Manufacturer
It is designed for parking lot,community and other small size road.it has advantages of working long time,easy operation,and simple maintenance etc.
7.5PS electric strat water-cooled diesel engine
Hydraulic stirring system with protective device, can stir clockwise or anti-clockwise.
LPG(gas tank suggest 50KG) ,Direct injection energy-e...
Specification of this Driving Type Multi-functional Thermoplastic(convex) Road Marking Machine Manufacturer
LXD168 driving type multi-functional thermoplastic(convex) road marking machine is Practical and multifunctional equipment, it has a high level of automation, high safety coefficient, it can help reduce labour intensity, improve the efficiency of construction. According to customers’ requirements,the machine can be applied to Hot melt spraying, Hot melt extrusion, hot melt vibrating...