Hot-melt autoclave marking machine: Two-component marking is a high-end marking that has emerged in recent years. It is different from hot-melt markings and normal temperature markings that are formed by physical drying methods such as temperature drop or solvent (water-based) volatilization. Tw...

Hand-held spray gun skills for marking machine Marking width: The current international standard width of the road marking machine is 15 cm, but you need to consider that the marking machine may also be used in parking lots and residential areas. At this time, you should buy a width adjustment f...

What kind of marking machine is good for expressways. The experienced construction team knows that the quality of the marking machine is closely related to many factors, such as: road environment, marking paint quality, road quality, air during construction Humidity, temperature, etc. The markin...

The surface treatment methods and requirements of cement concrete projects are related to the requirements of engineering characteristics. Therefore, the equipment and construction techniques used are different according to the requirements of the project. The main purpose of bridge deck chiseli...

Road markings are essential for maintaining the order of road traffic without any damage. When the runway is removed from glue, there must be clearing of the original road markings. Comprehensively considering the impact on road traffic, when the relevant departments choose the road marking remo...

Hand-held powerful chisel The traditional mechanical chisel's chiseling method is to use a sharp striking tool to hit the concrete surface with a piston to make the old and new concrete bond firmly. However, the traditional chiseling method has various disadvantages, such as low efficiency, ...

Marking cleaning shot blasting machinery beats, the heavier the better, the stroke is slightly surface construction, the progressive way is to make the cement asphalt pavement, highway bridge deck, bridge staggered, and the road milling machine in the marking cleaning has a milling width of 250-...

Operation rules of CNC marking machine. Check before operation. Check and confirm power switch before operation. Confirm that there is no short-circuit or short-circuit to ground between the terminals or exposed live parts. Before turning on the power, all switches are in the off state to ensure...

During construction, first use a high pressure road surface blowing machine cleaner to blow off the road surface dirt and sand and other debris to ensure that the road surface is free from loose particles, dust, asphalt, oil and other debris that affect the quality of the marking and dry. Then, ...