At present, when the marking of high-pressure water blasting machineis cleared, because some operations also have higher and higher environmental protection requirements, the high-pressure water jet marking removal method has emerged at the historic moment, and has become a type of marking that ...

Double-group road marking machine: Two-component marking is a high-end marking developed in recent years. It is different from hot-melt marking and normal-temperature marking due to temperature drop or solvent (water-based) volatilization and other physical drying methods to form a coating film....

Product features of the marking machine: The high-efficiency and large-flow S7000 can directly connect two guns to work at the same time, which greatly improves the work efficiency and supports the use of large-size nozzles. Powerful: The flow rate of 5.8 l/min makes SF7000 deservedly become th...

The marking cleaning of the pavement marking removal equipment not only reduces the water pressure in general, because the water jet has extremely strong impact and cutting force, a wide cleaning belt has emerged. Green construction is convenient. The entire road surface will become extremely cle...

Mark cleaning may prevent mechanical bounce. The heavier the better, the construction at the micro-surface of the stroke, the progressive way self-propelled on the cement asphalt pavement, highway bridge deck, bridge stagger, pavement milling machine in the cleaning of marking lines, milling wid...

The marked line removal magnetite filter material increases the wear resistance by 20~35% compared with the ordinary magnetite filter material. Can refer to the successful experience in the field, including the research and promotion of the three-layer filter media filter, the filter bed of the ...

The marking machine first applies the thixotropic paint remover to the road marking to be removed to make it fully contact with the road paint to be removed. Under the action of the paint remover, the road paint will penetrate, swell, and swell in 2-10 minutes. Physical and chemical changes such ...

The beam surface of the high-speed railway box beam (prefabricated beam) of the first-hand push type hair cutting machine is chiseled with waterproof treatment. Concrete chiseling on bridge side, bridge end face, beam side, beam end face. Remove ground coatings, paints, and various traffic markin...

The road line remover uses the correct mechanical equipment to scrub the pavement with the grinding method, the milling method, etc. to remove the pavement markings. If the operator does not have a good grasp, there will often be a small amount of markings remaining due to road surface damage. H...