The construction price of hot-melt road marking is between 28-45, the oscillation is slightly higher by about 70, and the construction price of hot-melt bai road marking is about 67.5.

There are three types of road marking paints used in my country: hot-melt type, water-based and room temperature soluble dao dosage form. The traffic safety management department uses road markings to achieve the purpose of strengthening traffic safety management, reducing accidents and beautifying urban roads, and eye-catching road markings depend on high-performance marking coatings. With the environmental protection of modern construction and the high requirements on the wear resistance, anti-skid, weather resistance and durability of the marking, low-cost hot-melt marking paint has become the first choice for road marking paint in my country. When changing the fluidity of hot-melt coatings, it is generally achieved by increasing the resin content or using various processing aids, and this method will make the coating drying to a certain extent difficult, and at the same time will cause the coating film to be soft and easy Sticky dirt. In addition, a more important point is that increasing the content of additives or resins in the coating will also increase the manufacturing cost of the coating. By adjusting the proportion of glidant in the paint, under the premise of ensuring quality, the paint has good fluidity, which is conducive to construction and at the same time achieves the purpose of controlling the construction price of hot-melt road marking.