Specification of this Driving Type Cold Paint Spray Road Marking Machine Manufacturer   Technical data:       Line type:  cold paint       Air compressor displacement:  0.45m3/min       Glass beads dispenser: Pneumatic dispensing (working pressure adjustable)       Paint tank: 150L*2（Oval paint tank, same as the picture provided by customer）       Hydraulic agitator: each paint tank equipped with a Hydraulic agitator.       hydraulic plunger pump：Graco          hydraulic plunger pump F...

Specification of this Hand Push Thermoplastic Road Marking Machine Manufacturer   Specification Thermoplastic road marking machine is the key equipment used in thermoplastic road marking construction, it need to work together with thermoplastic preheater. The marking shoe is made of high-precision cast iron,which can make the road line orderliness,uniform thickness and more beautiful. The grounded knife of marking shoe can adapt to different kinds of road.The glass beads dispen...

Specification of this Hand Push High Pressure Airless Cold Paint Road Marking Machines Manufacturer     Specification LXD-9L is the fastest among our cold paint road marking machines,its working speed can reach 13kh/h, Since it has powerful hydraulic system which make it work well under harsh environment. Parameter Feature Hand-push,high pressure airless spraying Fuel gasoline Engine 5.5PS (Honda engine) Pump built-in Reversing hydraulic pump(imported from German) M...

Specification of this Two-component Road Marking Machine Manufacturer   Specification It has two container for paint A and paint B, which can be mixed together by stirring device.the stirring device can stir automatically,which supported by mobile power. Line thickness 1.2-2.5mm Adjustable, Paint container capacity 50kg×2 Glass beads box capacity 15kg Curing agent box capacity 15kg Marking shoe Manual screeding type Standard configuration 375px/20/750px/1000px/1125px opt...

Specification of this Road Marking Remover Manufacturer LXD900 road marking paint remover is mainly used to remove cold paint lines. The imported Tupungato steel cutter head is hard and rotates fast. The cutter head has long operating life, and it is convenient to load and unload it. Engine 9.0HP(Honda Engine) Working width 220mm Working thickness adjusted according to the situation of road surface,range:0-4mm Work efficiency 500-700m²per day(8 hours) working life of Cutter ...

Specification of this Road Marking Machine Manufacturer For Thermoplastic With Extruder Technical Data Machine Type Road marking machine LXD-E618 Engine 25 HP Fuel diesel, capacity 34 liter Electrical system 12 V, battery 66 Ah Steering strong standard mechanical steering Drive /brake system hydrostatic drive, also acting as service brake ,parking brake hydraulically controlled multi disc brake Wheels front: 6.00-9 12PR, 5 hole-rim rear: 6.00-9 12PR, 5 hole-rim Compresso...

Specification of this High Pressure Water Blasting Road Marking Removal Manufacturer   It is used for removing all kinds of road marking lines with its high pressure water.it has advantages of easy operation,simple maintenance,high efficiency,without damaging road surface,environment friendly.   Engine DEUTZ Diesel Engine, Power:120kw Rotated speed:1500r/min High pressure pump Jestream Pump,pressure:140Mpa;Flow:35L/min;bearing:Japan NSK ;Plunger:hard alloy Φ20;High pressure seal:imp...

Specification of this Thermoplastic Road Making Paint Manufacturer Test item Technical requirements Test value Conclusion Density(g/cm³） 1.8~2.3 1.99 Qualified softening point 90~125 104 Qualified drying time ≤3 3 Qualified film appearance No wrinkle,spot,blister,crack,off,Glued tyres ,the colour of fill appearance should be closed to standard Meet the requirement Quali...

Specification of this Thermoplastic Road Marking Removal Manufacturer   Specification It is professional equipment which is widely used to remove road marking lines. The machine has the advantages of strong power, high speed, easy and safe operation, low vibration, noise and dustproof etc. Engine 13PS Honda Gasoline Engine Working width 225mm Grinding thickness adjusted according to the situation of road surface,normally less than 3mm Quantity of cutter 78 pieces Cutter Im...