—— Featured ——

Featured

  • Specification of this Two Component Road Spray Machine Manufacturer main configuration:double pump,hydraulic engine driving system,continuously variable transmission system. Max working pressure:3300PSI Max LPM:15LPM(hydraulic piston pump) oil tank capacity:3.6L engine power:6.5HP(Honda) working speed:2-3 Km/Hour glass beads broadcast system :pneumatic type Glass beads tank capacity:20L(27KG)  Pictures of this Buy Two Component Road Spray Machine   Our Pictures of this Two Co...
  • Specification of this High Pressure Airless Cold Paint Spray Road Marking Machine Manufacturer   Specification It is special equipment to normal temperature paint construction. It is suitable for roads, highway, parking lot,airport, station.it can mark a straight line, dotted line, curve, zebra crossing, arrows, etc. It is the spray equipment with high pressure,equal discharge and airless. It use gasoline engine to drive single plunger pump to work, which can generate high pressure ...
  • Specification of this Driving Type Multi-functional Thermoplastic(convex) Road Marking Machine Manufacturer LXD168 driving type multi-functional thermoplastic(convex) road marking machine is Practical and multifunctional equipment, it has a high level of automation, high safety coefficient, it can help reduce labour intensity, improve the efficiency of construction. According to customers’ requirements,the machine can be applied to Hot melt spraying, Hot melt extrusion, hot melt vibrating...
  • Specification of this Hand Push Cold Plastic Road Marking Machine Manufacturer Apply for MMA(98:2) cold plastic spot line   Item Cold plastic road marking machine for spot line(MMA 98:2) Engine Honda GX160 gasoline engine 5.5HP gasoline tank capacity 2.9L Electronic system 24V,Battery:5 Ah 20AR Compressor gas displacement 0.21Nm³./min Working air pressure 0.8PA Solidify monitoring system Import from Germany,EGE Electronic flow controller Drive method hydraulic drivi...
  • Specification of this High Pressure Airless Cold Paint Spray Road Marking Machine Manufacturer   Specification It is special equipment to normal temperature paint construction. It is suitable for roads, highway, parking lot,airport, station.it can mark a straight line, dotted line, curve, zebra crossing, arrows, etc. It is the spray equipment with high pressure,equal discharge and airless. It use gasoline engine to drive single plunger pump to work, which can generate high pressure ...
  • Specification of this High Pressure Road Surface Sweeper Manufacturer Product Introduction Road marking auxiliary equipment—road surface high pressure sweeper mainly used to  clean bleeding cement,mud,capping mass and cold paint marking line.It is equipped  with strength regulator which can be adjusted according to&n...
  • Specification of this Thermoplastic Vibrating Line Marking Paint Manufacturer Vibrating thermoplastic road marking paint consists of thermoplastic resin, modified rubber, fillers, and special materials and other substances. It is developed on the basis of pursuing high visibility and vibration. It is widely applied to the centre lines of roads (overtaking-prohibited lines), edge lines of highway, crossing slowdown lines and so on. Rainy night reflections: excellent visibility ...
  • Specification of this Thermoplastic Vibrating Line Marking Paint Manufacturer Vibrating thermoplastic road marking paint consists of thermoplastic resin, modified rubber, fillers, and special materials and other substances. It is developed on the basis of pursuing high visibility and vibration. It is widely applied to the centre lines of roads (overtaking-prohibited lines), edge lines of highway, crossing slowdown lines and so on. Rainy night reflections: excellent visibility ...
  • Specification of this Thermoplastic Road Making Paint Manufacturer Test item Technical requirements Test value Conclusion Density(g/cm³) 1.8~2.3 1.99 Qualified softening point 90~125 104 Qualified drying time ≤3 3 Qualified film appearance No wrinkle,spot,blister,crack,off,Glued tyres ,the colour of fill appearance should be closed to standard Meet the requirement Quali...