Specification of this Thermoplastic Road Making Paint Manufacturer Test item Technical requirements Test value Conclusion Density(g/cm³） 1.8~2.3 1.99 Qualified softening point 90~125 104 Qualified drying time ≤3 3 Qualified film appearance No wrinkle,spot,blister,crack,off,Glued tyres ,the colour of fill appearance should be closed to standard Meet the requirement Quali...

Specification of this High Pressure Road Surface Sweeper Manufacturer Product Introduction Road marking auxiliary equipment—road surface high pressure sweeper mainly used to  clean bleeding cement,mud,capping mass and cold paint marking line.It is equipped  with strength regulator which can be adjusted according to&n...

Specification of this Thermoplastic Road Making Paint Manufacturer Test item Technical requirements Test value Conclusion Density(g/cm³） 1.8~2.3 1.99 Qualified softening point 90~125 104 Qualified drying time ≤3 3 Qualified film appearance No wrinkle,spot,blister,crack,off,Glued tyres ,the colour of fill appearance should be closed to standard Meet the requirement Quali...

Specification of this Hand Push High Pressure Airless Cold Paint Road Marking Machine Manufacturer   Specification It is special equipment to normal temperature paint construction. It is suitable for roads, highway, parking lot,airport, station. It can mark a straight line, dotted line, curve, zebra crossing, arrows, etc. It is the spray equipment with high pressure,equal discharge and airless. It use gasoline engine to drive single plunger pump to work,which can generate high press...

Specification of this Boost Vehicle Manufacturer   Specification Why walk while you can seat? Use boostvehicle connect the road marking machine, the work efficiency will improve 2-3 times. Working speed 16km/h(move forward) 10kn/h(move backward) Color Yellow Engine Honda 5.5P Gradeability ≤ 60 degree Size 1500×660×1030mm Weight 80kg Pictures of this Buy Boost Vehicle   Our Pictures of this Boost Vehicle Factory Looking forward to your inquiry for thi...

Specification of this Driving Type Cold Paint Spray Road Marking Machine Manufacturer   Technical data:       Line type:  cold paint       Air compressor displacement:  0.45m3/min       Glass beads dispenser: Pneumatic dispensing (working pressure adjustable)       Paint tank: 150L*2（Oval paint tank, same as the picture provided by customer）       Hydraulic agitator: each paint tank equipped with a Hydraulic agitator.       hydraulic plunger pump：Graco          hydraulic plunger pump F...

Specification of this Two-component Road Marking Machine Manufacturer   Specification It has two container for paint A and paint B, which can be mixed together by stirring device.the stirring device can stir automatically,which supported by mobile power. Line thickness 1.2-2.5mm Adjustable, Paint container capacity 50kg×2 Glass beads box capacity 15kg Curing agent box capacity 15kg Marking shoe Manual screeding type Standard configuration 375px/20/750px/1000px/1125px opt...

Specification of this Truck Mounted Two Component Spray Machine Manufacturer   RoadLazer RoadPak System is a hydraulic striping system built for the professional road striping contractor. With the RoadPak airless striping system you can achieve extremely accurate lines at highly productive speeds – up to 10 mph (16 km/h).  Product highlights:   8 Ready to stripe RoadLazer RoadPak Systems Modular striping system offers unlimited striping possibilities 1 or 2 pump RoadPak for superior...

  Specification of this High Pressure Road Surface Blowing Machine Manufacturer   Specification LXD-II road surface blowing machine is an auxiliary equipment for road line marking construction, which mainly used to sweep the road surface before road marking construction. It is equipped with gasoline engine which can drive the fan to work, its powerful wind pressure can clean up impurities and dust of the road. It has the shelf to place primer barrel,which can help you complete t...